Elite Sim Golf

Elite Pro TeeTurf Hitting Strip 12"x30"

$159.99
Regular price ~~$279.95~~
Will not ship until

Wishlist

Ships direct from manufacturer. Allow 7-10 days for processing.

Elite Pro TeeTurf Hitting Strip 12"x30"

$159.99

The Breakdown

Why Golfers Choose Elite Pro TeeTurf

Replace The Strike Zone, Not The Whole Mat.

Every hitting mat dies in the same six inches. The Elite Pro TeeTurf Hitting Strip is the drop-in replacement for that spot — 12" × 30" of 1-1/8" nylon turf over a 5/8" high-grip foam base, cut to sit flush in any mat with a matching cutout.

It uses the same construction as the full Elite Pro TeeTurf mats, so the feel does not change after a swap. Deeper cushioning still absorbs the shock of a fat shot while letting the club dig enough to give honest feedback, and the flexible tee zone still takes real wooden tees.

Drop-In · No Adhesive

Supports Real Wooden Tees

Fits 12" × 30" Cutouts

ESG-Backed Support

Key Features At A Glance

Realistic Feel. Honest Feedback.

Drop-In Install

Lift the worn strip out, drop the new one in. No adhesive, no fasteners, no tools.

Real Wooden Tees

The flexible tee zone takes real wooden tees and rubber tees at your own height.

Joint-Friendly

Punishes fat shots with honest feedback without the wrist shock of thin, firm turf.

1-3/4" Total Build

1-1/8" nylon hitting turf over a 5/8" high-grip foam base, matched to the mat body.

Universal 12" × 30" Fit

Works in any hitting mat cut for a 12 inch by 30 inch strip, not just Elite Pro TeeTurf mats.

Cheaper Than A New Mat

Refresh the only part that wears out for a fraction of the cost of replacing the full surface.

Indoor Or Outdoor

Use it in a sim bay, garage, or basement, or outdoors on a patio, deck, or backyard practice area.

Full Shot Range

Driving, iron work, and chipping practice off a strike zone that behaves like real turf.

Specs & Dimensions

By The Numbers.

Strip Size

12" W x 30" L

Overall Thickness

1-3/4"

Turf

1-1/8" nylon hitting turf

Backing

5/8" high-grip foam

Fits

Any mat with a 12" x 30" cutout

Tee Support

Real wooden tees + rubber tees

Use

Indoor + outdoor

SKU

PTHM1230

Placement Note

Measurements are approximate. Make sure the surface under the cutout is flat so the new strip sits level with the surrounding mat.

Which Mats It Fits

Cutout Compatibility.

Mat	Coverage	Takes This Strip
Elite Pro TeeTurf 3ft x 5ft	15 sq ft	No cutout
Elite Pro TeeTurf 4ft x 5ft	20 sq ft	Yes — 12" x 30"
Elite Pro TeeTurf 5ft x 5ft	25 sq ft	Yes — 12" x 30"
Elite Pro TeeTurf 5ft x 10ft	50 sq ft	Yes — 12" x 30" or 12" x 36"

Not Sure About Your Cutout?

Measure the opening in your existing mat. Any mat cut for a 12" × 30" strip will take this one, regardless of brand.

Who This Strip Is For

If This Sounds Like Your Setup, You Are In The Right Place.

Worn Strike Zones

Owners whose mat is fine everywhere except the six inches where the club lands.

High-Volume Practice

Golfers putting hundreds of balls a week through one spot who plan on replacing it periodically.

Spare On The Shelf

Anyone who wants a backup strip ready so a worn zone never costs a practice session.

Other Brands Of Mat

Any mat cut for a 12" × 30" strip can take this one as an upgrade or replacement.

Mat & Bay Resources

Build The Rest Of The Bay.

Need more than a strip? Here is where to size the surface and the room around it.

All Hitting Mats & Strips

Compare every Elite Pro TeeTurf mat size plus complete hitting systems and landing turf.

Browse Hitting Mats →

SimKit Bundle Builder

Configure a complete simulator — enclosure, launch monitor, projector, and mat — around your room.

Start A Custom Build →

Install & Setup Hub

Written directions and video walkthroughs for bay layout, including mat and strip placement.

Open Install Hub →

Frequently Asked Questions

Elite Pro TeeTurf Strip FAQ.

Which mats does the Elite Pro TeeTurf Hitting Strip fit?

It fits any hitting mat with a 12 inch by 30 inch cutout, including the Elite Pro TeeTurf 4ft x 5ft, 5ft x 5ft, and 5ft x 10ft mats.

How do I install the strip?

Lift the worn strip out of the mat cutout and drop the new one in. There is no adhesive, no fasteners, and no tools required — the strip is cut to sit flush in the opening.

What are the strip dimensions?

The strip measures 12 inches wide by 30 inches long by 1-3/4 inches high, built from 1-1/8 inch nylon turf over a 5/8 inch high-grip foam backing.

Can I use real wooden tees in the strip?

Yes. The flexible tee zone accepts real wooden tees as well as rubber tees, so you can set driver tee height the way you would on a real tee box.

Does the strip punish fat shots?

Yes. The turf and foam combination lets the club dig slightly on a heavy strike so the mistake shows up in your feedback, without the wrist shock of thin, firm turf.

Can I use the strip on its own without a mat?

It can be used as a standalone hitting surface on a flat floor for practice, but it is designed as a drop-in strike zone for a full mat. On its own it gives you no surrounding stance platform.

How often should the strip be replaced?

It depends entirely on volume. The strip is the wear item by design, so replace it when the turf in the strike zone flattens, thins, or starts letting the club skid rather than dig.

Is the strip suitable for outdoor use?

Yes. It works indoors in a mat cutout and outdoors on patios, decks, and backyard practice areas. Place it on a clean, level surface.

Where can I see the full mat lineup?

All four Elite Pro TeeTurf mat sizes and every other hitting surface are compared in the Elite Sim Golf hitting mats collection at https://elitesimgolf.com/collections/hitting-mats-strips.

The Elite Sim Golf Advantage

Bought From People Who Build Bays.

Elite Sim Golf stocks the wear items, not just the big-ticket hardware — because a simulator that sits unused over a flattened strike zone is a simulator you stop enjoying.

Replacement Parts Stocked

The strip is carried as its own product so a worn strike zone never means buying a new mat.

Matched Construction

Same turf and foam spec as the full Elite Pro TeeTurf mats, so the feel does not change after a swap.

Complete Bay Sourcing

Enclosures, launch monitors, projectors, and mats from one place, sized to fit together.

Real Post-Purchase Support

Questions about fit, cutouts, or bay layout get answered by people who have built them.

Bottom Line: One wear point, one cheap fix — keep the mat you already own hitting like new with Elite Sim Golf.

You may also like

Precision. Power. Performance.

The Ultimate Indoor Golf Experience Awaits.

Elite Pro TeeTurf Hitting Strip 12"x30"

Elite Pro TeeTurf Hitting Strip 12"x30"

Replace The Strike Zone, Not The Whole Mat.

Realistic Feel. Honest Feedback.

Drop-In Install

Real Wooden Tees

Joint-Friendly

1-3/4" Total Build

Universal 12" × 30" Fit

Cheaper Than A New Mat

Indoor Or Outdoor

Full Shot Range

By The Numbers.

Placement Note

Cutout Compatibility.

Not Sure About Your Cutout?

If This Sounds Like Your Setup, You Are In The Right Place.

Worn Strike Zones

High-Volume Practice

Spare On The Shelf

Other Brands Of Mat

Build The Rest Of The Bay.

All Hitting Mats & Strips

SimKit Bundle Builder

Install & Setup Hub

Elite Pro TeeTurf Strip FAQ.

Which mats does the Elite Pro TeeTurf Hitting Strip fit?

How do I install the strip?

What are the strip dimensions?

Can I use real wooden tees in the strip?

Does the strip punish fat shots?

Can I use the strip on its own without a mat?

How often should the strip be replaced?

Is the strip suitable for outdoor use?

Where can I see the full mat lineup?

Bought From People Who Build Bays.

Replacement Parts Stocked

Matched Construction

Complete Bay Sourcing

Real Post-Purchase Support

Customer Reviews